Today, more and more standard base car configurations are equipped with cast-wheel rims. Times, when cheap models and usual complete sets of cars were equipped with stamped factory wheels with caps, for a long time, have passed.
Nowadays, when you buy a new car, it’s likely to have alloy wheels. But unfortunately, not everyone knows that these beautiful wheels get very dirty very quickly. Yes, yes, for sure you have repeatedly pointed out that alloy wheels can collect the most dirt. So any car owner is familiar with this situation. You can click for more info.
But is it really that because the wheels often get dirty, you need to continually drive to a car wash, where naturally, besides the wheels, you will have to wash the car body as well? Of course not. Each owner should know how to properly care for the wheels, cleaning them from accumulated dirt.
- It is worth noting that the rims are dirty not only from everyday road dirt and from wind, which is contaminated with sand and other particles. For example, a frequent cause of wheel contamination is the brown or black deposits from the brake pads.
- In the end, often our rims become very dirty. After all, mud, dust, interspersed with the particles of the brake pads due to the heating of the wheels during braking is baked on the surface of the wheel disks. As a result, cleaning the wheels is not so easy. Including contaminated and tires, which also clean is not always easy.
Therefore, to get rid of dirt on wheels and tires, drivers should use special chemical cleaners. Some motorists may be tempted to use ordinary household cleaners to clean wheel rims. For example, vinegar. Also, some can use WD-40 for cleaning, which is useful for removing hard resins from wheels. But remember that these tools are not universal and in some cases are not able to quickly clean the surface of discs and tires.
The Cleaning Options
If you clean the wheels at the same time as the general car wash, then, of course, you can wash off the main dirt from the wheel disks under pressure. In principle, this is a great way to clean the wheels. But it is not ideal, because in this way you are unlikely to wash off the brake dust, tar residues, resins, etc.
What cannot be said about the wheel cleaner, which can do the more in-depth cleaning of the surface of metal and rubber, in contrast to the pressure of water? Thanks to the individual chemical components that are used in wheel cleaners, the product can penetrate deep into all narrow cracks, crevices, chips, etc.